Adjust Guitar Neck to Align Your Guitar

Some guitars The truss rod fixed on the guitars is of various types, depending on the manufacturer of the instrument. Do not confuse this adjustment with the adjustment of the strings, which is done primarily to tune the sounds of the guitar. If the strings are closer to the body or are touching it as a result of the bend, it means that an adjustment is required, as the strings being too close to the body of the guitar will hamper the strumming or plucking action. One needs to understand that the truss rod adjustment is necessitated only when the guitar appears to be bent.

This will in turn ensure that the guitar is balanced, and still adequately taut, and this will allow it to be played properly. This tightening serves to bend the guitar very slightly in the opposite direction, so that the bend created by the tension of the strings is neutralized. The truss rod is nothing more than a steel rod, which is fixed to one end of the guitar whilst the other end can be adjusted by tightening of a knob like a turning screw. Under such conditions, you will be needed to adjust the Guitar Neck, through tightening of what is known as the truss rod.

However, over time as one begins to use it and tighten the strings, either because of the tension or because of other reasons including the weather, the neck can bend slightly out of shape. A new guitar is always adjusted at the place of manufacture to be somewhat flat.